With the launch of new models such as Qijun and Tianzhu, Nissan has also invested more safety technology in the new domestic models. These safety technologies enhance the active and passive safety of vehicles, and also participate in traffic such as pedestrians and other vehicles. Providing a better security environment, it can be said to be armed to the "toe."
This article refers to the address: http://
ITS early warning integrated security system
Nissan's ITS early warning integrated safety system can monitor the situation within 3 meters around the vehicle through four front, rear, left and right cameras, providing three warning functions: lane change zone, lane departure, and moving object/pedestrian detection. Achieve safe driving without blind spots.
MOD mobile object / pedestrian detection early warning system
The MOD mobile object/pedestrian detection and early warning system is mainly used in urban environments. It can detect well both pedestrians and non-motor vehicles, and promptly warn to prevent accidents. The SUV model, such as Qijun, has a higher body and this function is more practical.
BSW lane change blind zone warning system
The BSW lane change warning system also uses the cameras on both sides to detect vehicles in the blind area of ​​the rear view mirror to avoid accidents when the line is connected. If there is a vehicle in the blind zone, the warning light below the A-pillar will illuminate and the driver can take the correct action at this time.
LDW lane departure warning system
Long-distance driving will inevitably lead to fatigue, this time the LDW lane departure warning system came in handy. It can detect whether the vehicle has deviated from the correct direction of travel by scanning the road ahead. At the same time, if the driver shifts the trajectory after the driver turns the lights, the system will not be alerted, which will allow everyone to develop a good driving habit of turning the lights and wiring.
AVM panoramic surveillance image system
The AVM panoramic surveillance imaging system is now becoming more popular on Nissan models, and models such as Qijun are also equipped. Due to the increasingly complex urban parking environment, the panoramic image system that can cover 360 objects around the vehicle not only makes parking more convenient, but also avoids the unnecessary loss caused by cockroaches. It is easy to use and fast.
ATC active tracking control system
The ATC active tracking control system was originally applied to Infiniti models, allowing vehicles to pass through corners more stably and accurately. Today, Dongfeng Nissan's new Tianyi and Xinqijun are also equipped with this technology. ATC active tracking control system can monitor the vehicle in real time during cornering. When there is insufficient turning or over-steering, the ATC system can brake a certain wheel separately, so as to control the speed of the four wheels reasonably. Help the vehicle to pass the curve with a reasonable trajectory, avoiding the loss of control of the vehicle and increasing the driving pleasure.
HAS ramp assist system
The HAS ramp assist system uses a VDC system to monitor the dynamics of the vehicle. When the vehicle starts on a slope, the system can help the vehicle stay on the slope for about 2 seconds after releasing the brake pedal, thus leaving the driver with the driver. There is enough time to switch between the brake pedal and the accelerator pedal to prevent the car from slipping uphill and reduce the risk of driving on the slope. The HAS ramp assist system is useful in complex environments such as mountain roads and basements, providing added security for users.
CAT6 Lan Cable performance is superior to iso11801-2002, TIA/EIA568C.2 and GB50311-2007, and it has passed the test of third-party authoritative institutions and obtained UL certification
Backward compatibility, downward-compatible CAT5e and lower categories of systems, to avoid user investment losses
Low transmission delay, compact cable design, reduce cable distortion and knotting during installation
The center PE cross frame ensures that the twisted pair is not damaged during the installation to the greatest extent, and has high anti-electromagnetic interference, so that the bit error rate of the transmitted signal is reduced to the lowest degree.
Built-in tearing rope, easy to construct.
Mark, cable number, cable class, cable gauge, fire rating, standard, meter number and lot number are printed on the outer sheath of cables.
The inner axle and outer carton are packed, and the outer carton is pasted with certificate of quality.
The production process of insulated single line adopts on-line control eccentricity, on-line spark detector, on-line water capacitance detector and other on-line equipment to ensure the high reliability and consistency of the products. The color code of insulated single line adopts color strip to meet the environmental protection requirements.
All materials made of copper, PE and PVC have been tested and analyzed, and the content of radioactive harmful heavy metals has been completely controlled within the strict international standards.
Insulation layer material is high density polyethylene (HDPE).
Different flame-retardant grades of materials can be used for outer sheath materials.
Cat6 Lan Cable,Cat6E Ethernet Cable,Flat Cat6 Ethernet Cable,Outdoor Lan Cable Cat6
Shenzhen Kingwire Electronics Co., Ltd. , https://www.kingwires.com