Next at the computer, click Start - Programs - Accessories - Command Prompt to open a command prompt.
At the command prompt, find the location of your adb tool. In my F disk adb, enter F: Enter, and then type cd\adb\Enter.
Then wirelessly connect the smart TV (guaranteed that the TV computer is in the home wireless router's local area network). My TV IP is 192.168.1.104, then enter adb connect 192.168.1.104:5555 Enter, even on the prompt, not connected again Try until connected.
The last is to install the software, my software location is F: \ smart TV software \shafaguanjia_v2.0_tv, then enter adb install F: \ smart TV software \duomi_v2.0_tv Enter, will prompt the installation is successful.
The command to exit the connection is adb disconnet. )
Adb.rar
To get to know more about the big players, please log in to the sofa (http://).
power connector is used in power module system. It can select the matching power + signal connector according to the need. The feature is that the number of power and signal contacts and the matching sequence can be selected arbitrarily while keeping the connector size and contact core number unchanged.
Plug (male) / socket (female) can be installed at 90 or 180 degrees. It supports mixed or independent combination of signal and power. The quantity range of power and signal is (2-16) pin and (12-128) pin respectively
Product features
High temperature resistant, glass fiber reinforced and flame retardant polyester is used as insulation material
Copper gold composite conductor with high conductivity is used, and the contact area of the conductor is plated with gold
It adopts shrapnel contact, which has the characteristics of integration, small volume, large current carrying capacity, soft plug-in, blind plug-in, self guidance and high dynamic contact reliability. This series of products can be interchanged with FCI's powerblade series and Tyco's multi-beam series
There are three sizes of center distance of power contact: 5.08mm, 6.35mm and 7.62mm
The length of power hole / signal pin can be selected in two sizes. The power rated current is 45A and the signal rated current is 2.5A
Power+ Signal Power Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com