Small and practical acupuncture pen circuit
The working principle is as follows: IC1 is a music integrated circuit. After K1 is closed, the audio current output by IC1 is amplified by BG1-BG3, and then boosted by transformer B1, and the secondary output is high voltage of about 200V. It is divided into two parts, AC and DC. The AC high-voltage AC power is directly output to the needle contact, and the w2 is appropriately adjusted. When the contact contacts the human skin, it can generate strong stimulation. Because the AC has a skin effect, the treatment can only act on the skin surface. The DC block high voltage is generated by the rectification and filter circuit composed of AC power through D1～D4 and C2, and is output to the contact and output socket. The acupuncture patch is used to adjust the w2 according to the patch spacing to make the LED2 just illuminate, which can achieve deep treatment. purpose.
Draw-wire sensors of the wire sensor series measure with high linearity across the entire measuring range and are used for distance and position measurements of 100mm up to 20,000mm. Draw-wire sensors from LANDER are ideal for integration and subsequent assembly in serial OEM applications, e.g., in medical devices, lifts, conveyors and automotive engineering.
Linear Encoder,Digital Linear Encoder,Draw Wire Sensor,1500Mm Linear Encoder
Jilin Lander Intelligent Technology Co., Ltd , https://www.landermotor.com