Lamp 12V switching power supply circuit diagram

Parts list:

R1 1Ω

R2 2.2Ω

R3 470k

R4 2.2Ω

D1 DB3 bidirectional trigger diode

D2 1N4007

D3 FR107

D4 FR107

C1 220P 630V

C2 3300P 100V

C3 0.1μf 400V

C3 0.1μf 400V

Q1 MJ13003

Q2 MJ13003

L1 5T

L2 5T

L3 1T

L1, L2, L3 are in the same ferrite ring

T primary 117T secondary 11T E-shaped ferrite transformer core cross-sectional area 6X6mm

The output voltage of this circuit diagram is 12V AC, which is suitable for the low voltage power supply device of the lamp inside the lamp. This circuit does not have a voltage regulation characteristic, so be careful when using it.

Lamp 12V switching power supply circuit diagram

USB 3.1 Interfaces

Emphasis: Because of the market chaos and the cheating of bad dealers, most people simply don't understand USB 3.0 and USB 3.1. USB 3.1 Gen1 is USB 3.0. And USB 3.1 Gen2 is the real USB 3.1. The maximum transmission bandwidth of USB 2.0 is 480 Mbps (i.e. 60MB/s), USB 3.0 (i.e. USB 3.1 Gen1) is 5.0 Gbps (500MB/s), and USB 3.1 Gen 2 is 10.0 Gbps (although the nominal interface theoretical rate of USB 3.1 is 10Gbps), but it also retains some bandwidth to support other functions, so it has a good performance. The actual effective bandwidth is about 7.2 Gbps. USB 2.0 is a four-pin interface, and USB 3.0 and USB 3.1 are nine-pin interfaces.
USB 3.1 is the latest USB specification, which was initiated by big companies such as Intel. Compared with the existing USB technology, the new USB technology uses a more efficient data encoding system and provides more than twice the effective data throughput (USB IF Association). It is fully downward compatible with existing USB connectors and cables.
USB 3.1 is compatible with existing USB 3.0 software stacks and devices
USB3.1 LOGO
USB3.1 LOGO
Protocol, 5Gbps hubs and devices, USB 2.0 products.
Intel, which owns Thunderbolt technology, also welcomes the formation of the USB 3.1 standard. USB 3.1 contains most of the features of USB 3.0 [2]. USB 3.1, as the next generation of USB transmission specifications, is commonly referred to as "SuperSpeed+", which will replace USB 3.0 in the future. [3]

USB 3.1 C SMT FINISHED,DIP USB3.1 Plug,Vertical USB Connector,USB Type-c Receptacles Shell

ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com

This entry was posted in on