The lights have become an important part of the car's beautiful appearance and function, but the most basic function of car lights - safety, is often overlooked when buying a car.
Before the early 1980s, the headlights of the car were all glass-sealed, with the lens and the mirror connected together, with a thermal radiation incandescent lamp placed in the middle. In the early 1980s, headlights with interchangeable light sources appeared. In the late 1980s, in order to ensure that the car was stable and safe on the expressway, the illumination of the headlights at 50 meters in front of the car was increased from 6 lux to 12 lux, and high-efficiency gas discharge lamps were introduced to replace the halogen tungsten incandescent lamps. .
There are many types of modern car lights. As car exterior lights, there are night lights, fog lights, curve lights for arc lighting and direction lights when turning; brake lights, direction lights, and front photos at the rear of the car. The taillights that ignite at the same time. Traceable reflective mirrors, reversing lights, and license plate lights are easy to find in the parking lot. Night lights are commonly known as "headlights." Reasonable use of the headlights should be made into a low beam when the car is going to be turned into a high beam in time to make it far away from the line of sight and make up for the unclear sight caused by the car. When passing through an intersection and overtaking, you should prompt to change the distance.
The safest taillights are corner three-color taillights, while providing rear and side safety information. Generally, the brake light is installed at the same or similar position as the tail light. Recently, the high-position brake light installed at the glass window and the like is far away from the tail light and has a higher position. Therefore, the driver's signal is easier for the rear vehicle when braking. It was found that the brake status display was more effective. Drivers should be familiar with the role of these lights and use them skillfully.
Solder Cup Waterproof D-Sub Connector
The Solder Cups D-sub connector, also known as Solder Cups D-sub connector , typically contains a pin layout of 9 pin, 15 pin, 25 pin, 37 pin & 50 pin positions housed in increasing shell sizes accordingly. They are available in both male (plug) and female (socket) variants with the male signal contacts/pins (current rating of 5A) spaced every 2.76mm in horizontal rows and the spacing of rows vertically at 2.84mm laid out half the distance between pins of existing rows.
IP66 IP67 Rated Waterproof D-Sub Panel Mount Solder Connectors
Harsh outdoor or indoor environments can destroy electronic equipment. Standard D-sub connectors are not intended to withstand contaminants such as water and dust. These waterproof solder cup connectors are available in male or female genders and DB9, DB15, DB25, and HD15 sizes. They will accommodate wire ranges from 30 - 20 AWG. Construction features gold plated brass contacts, nickel plated steel shells, and a silicone insulating ring. Maximum recommended panel thickness is 0.078".
Antenk offer a wide range of waterproof standard density and high density male and female high density D-Sub connectors solder cup with stamped and formed Contacts in cable mount used in a variety of demanding applications.
Antenk's Solder Cup D-Sub Connectors Stamped contacts
FEATURES
Solder cup d-subs available in industry sizes/positions
Low cost economy series.
Nickel shells have indents to provide grounding and additional retention.
Low cost & high performance, non-removable stamped contacts.
Optional mounting hardware available.
Antenk's SOLDER CUP D-SUB CONNECTORS Stamped contacts
MATERIALS
Shell: Steel, Tin or Nickel Plated
Insulator: Glass-filled thermoplastic. U.L. rated 94V-O
(230°C process temp)
Stamped contacts: Male pins - Brass | Female pins - Phosphor bronze
Plating: Gold flash on entire contact (contact us for other plating options)
Solder Cup Waterproof D-Sub Connector Stamped & Formed Contact, Solder Cup Waterproof D-Sub Connector Machined Contacts, Waterproof Panel Mount Solder Cup D-Sub Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com