Automatic wiper controller circuit schematic

Automatic wiper controller circuit schematic

When there is no rain, it has a high resistance with the circuit "ground" line; when it is rainy. The base current of VT1 increases, the ce junction resistance becomes smaller, 555 and R1, Rce form a multi-vibrator with a very low frequency. When it is heavy, the probe is in full contact with "ground". The ce junction resistance is smaller, so the oscillation frequency is higher. The orthogonal square wave output of the 3-pin output drives VT2 and VT3 to make the wiper motor run at full speed, which drives the wiper to swing. Brush off the rain on the windshield.



Copper Connecting Terminals

Our company specializes in the production and sales of all kinds of terminals, copper terminals, nose wire ears, cold pressed terminals, copper joints, but also according to customer requirements for customization and production, our raw materials are produced and sold by ourselves, we have their own raw materials processing plant, high purity T2 copper, quality and quantity, come to me to order it!

Copper Connecting Terminals,Cable Lugs Insulated Cord End Terminals,Pvc Insulated Cord End Terminal,Cable Connector Insulated Cord End Terminal

Taixing Longyi Terminals Co.,Ltd. , https://www.lycopperterminals.com

This entry was posted in on