Wire Core Material: Bare Copper Wire
Certification: ISO, CCC, CE
Brand: Jinshui
Trademark: JINSHUI
Specification: CE, SGS, CCC, ISO
Origin: Zhengzhou Henan
Wire Core Material: Bare Copper Wire
Certification: ISO, CCC, CE
Brand: Jinshui
Trademark: JINSHUI
Specification: CE, SGS, CCC, ISO
Origin: Zhengzhou Henan
Brief Introduction for 4 core power Cable
 lpe swa pvc power supply cable Armoured 4 core power Cable  is applicable for power transmission through the power line of rated voltage 1kV and below, and it is proper to lay these cables in the fixed places, such as hotels, stations, chemical engineering and oil platforms, mines, power plants, metros, and high buildings, etc.
Construction for 4 core power Cable
Conductor: copper
Insulation:PVC
Armor: SWA,STA
Sheath:PVC
Character: flame retardant, fire resistance Â
Â
Producr range of 4 core power Cable
Type |
Cu/XLPE/SWA/PVC, Al/XLPE/SWA/PVC |
|
Voltage |
0.6/1 kV |
|
Cores |
1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E |
|
Range of Nominal cross section |
1.5 mm2 - 630 mm2 |
|
Application |
Low voltage armoured power cable applies to electrical power transmission and distribution lines with AC rated voltage U0/U up to and including 0.6/1 kV. For laying indoors, in tunnel, cable trench, well or direct in ground, able to bear external mechanical forces, and certain force |
|
Standard |
IEC 60502, BS 7870, GB/T12706 |
Â
Description for  4 core power Cable
YJV22 |
XLPE Insulated PVC Sheathed Steel Tape Armoured Power Cable |
Suitable for burying in ground, Able to bear external mechanical forces but large pulling forces. |
YJLV22 |
Al. Insulated PVC Sheathed Steel Tape Armoured Power Cable |
|
YJV32 |
Copper Conductor XLPE Insulated Fine PVC Sheathed Steel Wire Armoured Power Cable |
Apply to shafts,water and soil,able to bear the larger positive pressure. |
YJLV32 |
Al Conductor XLPE Insulated Fine PVC Sheathed Steel Wire Armoured Power Cable |
Â
Brief Introduction for 4 core power Cable
 lpe swa pvc power supply cable Armoured 4 core power Cable  is applicable for power transmission through the power line of rated voltage 1kV and below, and it is proper to lay these cables in the fixed places, such as hotels, stations, chemical engineering and oil platforms, mines, power plants, metros, and high buildings, etc.
Construction for 4 core power Cable
Conductor: copper
Insulation:PVC
Armor: SWA,STA
Sheath:PVC
Character: flame retardant, fire resistance Â
Â
Producr range of 4 core power Cable
Type |
Cu/XLPE/SWA/PVC, Al/XLPE/SWA/PVC |
|
Voltage |
0.6/1 kV |
|
Cores |
1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E |
|
Range of Nominal cross section |
1.5 mm2 - 630 mm2 |
|
Application |
Low voltage armoured power cable applies to electrical power transmission and distribution lines with AC rated voltage U0/U up to and including 0.6/1 kV. For laying indoors, in tunnel, cable trench, well or direct in ground, able to bear external mechanical forces, and certain force |
|
Standard |
IEC 60502, BS 7870, GB/T12706 |
Â
Description for  4 core power Cable
YJV22 |
XLPE Insulated PVC Sheathed Steel Tape Armoured Power Cable |
Suitable for burying in ground, Able to bear external mechanical forces but large pulling forces. |
YJLV22 |
Al. Insulated PVC Sheathed Steel Tape Armoured Power Cable |
|
YJV32 |
Copper Conductor XLPE Insulated Fine PVC Sheathed Steel Wire Armoured Power Cable |
Apply to shafts,water and soil,able to bear the larger positive pressure. |
YJLV32 |
Al Conductor XLPE Insulated Fine PVC Sheathed Steel Wire Armoured Power Cable |
Â
Fpc Connector,Straight Pin Fpc Connector,Gold-Plated Straight Pin Fpc Connector,Conventional Fpc Connector
Shenzhen Jinyicheng Electronci Technology Co.,Ltd. , https://www.jycconnectors.com