TDK-EPC, a subsidiary of TDK Co., Ltd., developed a new thin film common mode filter (TDK TCE1210), which began mass production in April 2010. The development of this new product enables a single product to effectively suppress common mode noise and static electricity generated during high-speed differential transmission.
This article refers to the address: http://
The new product is based on the same size (1.25×1.00×0.60mm) as the previous product (thin film filter) of the company, and its original thin film circuit molding technology and material technology have been successfully used. The internal structure adds ESD transient voltage suppression.
Therefore, a circuit that uses a common mode filter to control noise and a varistor to achieve antistatic countermeasures or electrostatic discharge suppression can be exchanged for a new product built using the ESD function. This can reduce the number of built-in parts and reduce the mounting area, which helps mobile devices to become more compact.
The new product has a cutoff frequency of 5.0 GHz, a common mode impedance of 90 ± 25 Ω, and a rated current of 100 mA. ESD durability meets the international surge specification IEC61000-4-2. In addition, the implementation of low-capacity makes the product have no effect on the impedance (TDR measurement), and is most suitable for high-speed interfaces such as HDMI (High Definition Multimedia).
The new product is mainly suitable for EMI and ESD parts used in high-speed, high-capacity data transmission, including HDMI, USB3.0, Serial ATA, etc. for home electronic devices such as mobile devices.
main application
It is suitable for noise generated by high-speed differential transmission of general consumer products such as mobile devices and countermeasures against static electricity.
main feature
Common mode noise and static countermeasures can be achieved with a single product.
It can reduce the number of loaded parts and reduce the mounting area.
Main data
Product series TCE1210-900-2P-T000
Common mode impedance [Ω] 90±25
Cutoff frequency 5.0 GHz
Rated voltage 10V
Rated current 100mA
Dimensions [mm] 1.25 × 1.00 × 0.60mm3
Magnetic Transducer,Smd Magnetic Transducer,Buzzer Magnetic Transducer,Magnetic Transducer Buzzer
NINGBO SANCO ELECTRONICS CO., LTD. , https://www.sancobuzzer.com