Hi, dear fellows, Xiaojie is here again. Are you cold? Is it purple, Xiaojie is warm in Shenzhen? The popsicle in his left hand and the ice stick in his right hand~~~ Gradually like winter, the weather is getting colder. Everybody remembers to add clothes and the watch has to catch a cold.
Recently feedback HD channel Kartun's more friends, in fact, the HD channel is the reason why Caton is the speed, network environment, the device's firmware decoding capabilities, program sources and other factors caused by the joint, the smooth playback of high-definition channels more speed With the device's firmware decoding capabilities have higher requirements. In order to provide our friends with the best video experience, we have repeatedly made a difficult decision: HD channels will be offline. Of course, if you can play HD channels smoothly, you only need to bind the online online custom account. Then the HD channel will be automatically pushed to your device. Of course, many users will say that HD can be played at other homes. Why isn’t your home at all? Actually, we use the HD 720P resolution above, but we don’t believe you can take us. The standard definition to compare with other family's HD, whether there is a difference in the definition! The definition of our standard definition is also good!
The method of binding network online custom push HD channels is as follows:
Download address: http://apps.sfcdn.org/apk/com.togic.livevideo
1. Login to the online custom account
2. Bind the device to Tektronix video network online custom account
Open the device's (Box/Smart TV) Tektronix video software, select "Account Bind" in the "Personal Center", and confirm with the remote control "OK button". Enter the 6-digit pairing code in the middle of the following figure into the computer's dialog box, and click OK to bind.
3. When the binding is successful, the box end will show that it is bound. Otherwise, it means that the binding is not successful.
4. Modify the status of the hidden HD channel to have been displayed
In the left side of the computer-side network online custom account, find the “Manage Category†option, select the HD channel, click “Hiddenâ€, and change the display status of the HD channel to “Shownâ€.
5. Watch the HD channel below the live channel category
After completing the account binding, exit the software for 15 seconds and then enter the live broadcast interface of the software's TV station. Press the remote control “ok†to call up the channel list, and “left and right buttons†select to switch to HD channel classification. If you have not yet watched HD channels under the HD channel classification, you can switch to the playback interface of any channel using the “Left and Right buttonsâ€. Press the “Menu button†on the remote control and select “Online customizationâ€. Press the ok button on the remote control to synchronize immediately.
6, Concerned about the official Czech Republic WeChat, microblogging, get the latest activities, updates
PoE Splitter
The POE splitter is opposite to the POE power supply. POE power supply combines data signal and power, so POE power supply is also called POE combiner. The working process of the POE splitter is just the opposite, which separates the data signal from the power. If data terminals such as network cameras (IPC), wireless APs, and IP phones support POE power supply, you do not need to use a POE splitter when wiring, and you can directly supply power via a network cable. The POE splitter is mainly used for PSE devices such as POE switches and POE power supplies at the upper end, but the devices connected to the lower end do not support POE. The POE splitter separates the power supply into data signal and power. There are two output lines, one is the power output line, and the other is the network data signal output line, that is, the ordinary network cable. The power output has 5V/9/12V, etc., which can match various DC input non-POE power receiving terminals, and supports the IEEE 802.3af/802.3at standard. The data signal output line, that is, the ordinary network cable, can be directly connected to the network port of the non-POE power receiving terminal.
The POE splitter is used in conjunction with PSE power supply equipment to supply power to network equipment such as wireless APs, wireless routers, IP cameras, and IP phones in a network environment that lacks a power cord or is far from a power outlet. In many monitoring occasions, the best location for monitoring may not be very convenient for equipment to obtain power. The emergence of POE splitters facilitates the integration of equipment that does not support POE power supply into the POE network, and the monitoring equipment does not have to sacrifice the most to take care of the distance of the socket. Optimal installation location.
Poe Splitter,Poe Isolator,Output Poe Splitter,Scodeno Poe Splitter
Shenzhen Scodeno Technology Co.,Ltd , https://www.scodenonet.com