I. Tender No. 2009-5-000099 Type of procurement organization: Government concentration
Second, the content, use, quantity, brief technical requirements of the tender number, the serial number, the number of the label, the quantity of the unit, the technical requirements, the use of the deposit (yuan)
1 2009-5-000099-1 Electronic display 1 block see bidding documents 3000.00
Third, the qualification requirements of the bid supplier
1. Compliance with the supplier qualification requirements of Article 22 of the Government Procurement Law, and the membership of the government procurement supplier of the Center.
2. An independent legal person registered in the territory of the People's Republic of China with a registered capital of RMB 500,000 (including RMB 50,000). Have the above equipment production or business qualifications.
3. Have the necessary equipment and professional technical ability to perform the contract, with, and without.
4. Submit the product or service in accordance with none.
5. A number of affiliated companies with bidding qualifications only accept one of them to participate in the bidding activities.
6, other: none
Fourth, the release of the tender documents
Time: 2009-5-31 to 2009-6-10 (except weekends and legal holidays)
8:30 am to 12:00 am, 2:30 pm to 5:30 pm
Venue: Window No. 16, 4th Floor, No. 216, Station Road, Yuecheng District, Shaoxing, Zhejiang, China
Tender price: 100.00 yuan per book, no refund after sale
The information that the bidder should present when purchasing the bid: The government procurement supplier membership card, the government procurement supplier registration form, the original and copy of the registration ID card, the bid bond
V. Deadline for submission of bids: 2009-6-22 9:30
VI. Place of Bidding: Room 405, 4th Floor, No. 216, Station Road, Yuecheng District, Shaoxing, Zhejiang, China
Seven, the opening time: 2009-6-22 9:30
Bid Opening Location: Room 405, 4th Floor, No. 216, Station Road, Yuecheng District, Shaoxing, Zhejiang, China
8. Bid security: Delivery method: Cash or transfer account name: Shaoxing City Public Resource Trading Center deposit account bank and account: Shaoxing City Commercial Bank Business Department 0900000103411100010
9. Other matters:
Budget amount: 300,000
Purchaser or its agency contact method Purchasing unit: Shaoxing No. 1 Middle School Branch
Agency Name: Shaoxing Public Resource Trading Center Company Name: Shaoxing Public Resource Trading Center Contact: Xu Song Tel: 0575-88014864 E-mail: Fax: Postal Code: Address: No. 216, Station Road, Yuecheng District, Shaoxing, Zhejiang, China
1.ANTENK Wire to Board connectors are avialable in different terminations and sizes intended for use on a variety of applications. These connectors provide power and signal with different body styles, termination options, and centerlines. To find the wire to board set required, click on the appropriate sub section below.
2.Our products are widely used in electronic equipments,such as monitors ,electronic instruments,computer motherboards,program-controlled switchboards,LED,digital cameras,MP4 players,a variety of removable storage disks,cordless telephones,walkie-talkies,mobile phones,digital home appliances and electronic toys,high-speed train,aviation,communication station,Military and so on
Antenk Wire To Board Connectors Ranges:
Power Wire to Board
IDC Wire to Board
Locking Wire to Board
Latching Wire to Board
Fine Pitch Wire to Board
Wire to Board Connectors Information
Description
Wire-to-board connectors are used to interconnect printed circuit boards (PCBs) by using connectors attached to wires.
Specifications
Specifications for a wire to board connector include the following.
Wire-entry angle - There are three wire-entry angle styles: vertical, right-angle, and bottom-entry.
Wire size - Wire size is usually measured in American wire gauge (AWG), a standard for non-ferrous wire conductor sizes. The term "gauge" refers to the wire`s diameter. The higher the gauge number, the smaller the diameter and the thinner the wire.
Circuits or positions - With wire to board connectors, the number of circuits or positions may range from 1 to 120.
Pitch or center spacing - Pitch or center spacing is measured in millimeters (mm) or inches.
Lock to mating style - There are three basic lock-to-mating styles: positive, friction, and friction ramp.
Maximum current - The maximum current or current-carrying capacity is measured in amperes (A) and ranges from 1.0 A to 50. A.
Termination Methods
Crimp is the physical compression of a contact wire around a conductor to make an electrical and mechanical connection. Insulation displacement connectors (IDC) slice through the cable insulation to make a connection. Choices for termination method also include cage clamp, screw, tabs, and solder cups.
PCB Mounting Styles
With wire to board connectors, there are four choices for PCB mounting.
Through-hole technology (THT) mounts components on a PCB by inserting component leads through holes in the board and then soldering the leads in place on the opposite side of the board.
Surface mount technology (SMT) adds components to a PCB by soldering component leads or terminals to the top surface of the board. SMT components have a flat surface that is soldered to a flat pad on the face of the PCB. Typically, the PCB pad is coated with a paste-like formulation of solder and flux.
Press-fit and compression-style Board To Board Connectors are also commonly available.Wire to Board Connectors Information
Standards
Wire-to-board connectors carry approvals from various national and international organizations. In North America, they often bear marks from Underwriters Laboratories (UL) and/or the Canadian Standards Association (CSA).
A wire to board connector for the European marketplace should comply with the Restriction of Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE) directives from the European Union (EU). Wire-to-board connectors that comply with other requirements are also available.
BS 9526 N0001 - Specification for multi-contact edge socket electrical connectors.
Wire To Board Connectors,Wire Harness,Pcb Wire To Board Connector,Pin Wire To Board Connector,IDC Wire to Board,Locking Wire to Board,Latching Wire to Board,Fine Pitch Wire to Board
ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com