NCP1400A: Micropower fixed frequency pulse width modulation boost DC-DC converter

High-power led lamp beads 1W white light Sanan 30mil high power LED lamp beads imitation lumens
Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin
GW MB10F 0.8A 1000V rectifier bridge

description
The NCP1400A Series is a micropower fixed frequency pulse width modulated step-up DC-DC converter designed to power a portable device from a one or two battery pack. These periods can be designed to start with a 0.8V battery voltage and can be as low as 0.2V or less during operation. With four components, this series can be implemented in a simple way to achieve a high efficiency converter with an output current capacity of up to 100mA. Each device includes an on-chip oscillator, pulse width modulation controller, and phase compensation error amplifier for discontinuous mode to ensure converter stability, soft start, voltage reference, drive device, and finite current protection. Power MOSFET switch. Chip enable features are also provided to power down the converter to extend battery life. The NCP1400 device family has five standard regulated output voltages. Other output voltage devices can be fabricated from 1.8V to 4.9V at 100mA intervals.

NCP1400A pin arrangement and marking diagram:

Very low starting voltage of ☉0.8V ☉ running below 0.2V ☉ only four peripheral components are required to realize simple and efficient converter ☉ output current capacity up to 100mA ☉ fixed frequency pulse width modulation operation ☉ phase compensation error amplifier makes converter Stable operation ☉ chip enables power-off capability to extend battery life ☉ lead-free package

Application areas Cellular phones, pagers, personal digital assistants, electronic game consoles, digital cameras, video cameras, handheld instruments

Typical application circuit of the NCP1400A:

(Please read the PDF for details)

Lithium Iron Phosphate Battery

FEATURES & BENEFITS

Saintish 12.8V Lithium Iron Phosphate Battery built-in BMS to protect it from overcharge/discharge, temperature and short circuit. Monitors the battery operation status on mobile devices in real time with the built-in Bluetooth module.


High energy density (1/3 weights of Lead-acid),Lithium Iron Phosphate Battery is 50% lighter than a lead acid battery which is same capacity. Light weight of this deep cycle lithium battery is perfect for Caravan/Camper, Marine, Solar system, Solar street light as well as other Lead Acid replacement application.

Grade A prismatic battery cells ensure a more than 3000 cycles lifespan, which is more than 10 times to Lead Acid with 200~500 cycles. Wide operating Temp: Charge: 0°C~45°C; Discharge: -20°C~60°C.

The portable lithium battery pack's case material is ABS-FR material and the enclosure protection is IP65 waterproof, which lets you free from worrying about installing batteries indoors or outdoors. LiFePO4 Battery supports series(Up to 4 pcs) and parallel(up to 4pcs) connections.


Lithium Iron Phosphate Battery, 12.8V Lithium Battery, Rechargeble Battery, Lithium Battery for Caravan

Hangzhou Saintish Technology Co.,Ltd. , https://www.saintishtech.com

This entry was posted in on