LED dimming drivers can't do the same because of their VF value characteristics. Some VF values ​​also change with temperature and current, which is generally not suitable for parallel design. However, in some cases, it is necessary to solve the problem of driving cost of multiple LED dimming drivers in parallel. These designs can be used for reference.
Note that the VF value binning is required. The LED of the same VF value should be used on the same product as much as possible. The product can ensure that the error current is within 1 mA and the LED is in a working constant current state.
The integrated triode can keep the LED currents consistent. The triodes produced under the same temperature conditions and the same process conditions can ensure that each current is basically the same. The constant current part can be designed under the condition that the requirement is not very high, and the stable voltage or the stable PWM value drives the stabilized triode bias to achieve a basic constant current.
A high-precision IC is used as a constant current reference source, and R can set the IC output current. Once the R resistance value is determined, a fixed resistor can be used instead. The use of multi-triode integrated devices reduces the number of ICs used, thereby reducing the cost of designing products.
The linear high-power LED dimming driver constant current output can be used in parallel. In the product design, we often can't find a driver IC with a large current. Generally, 2A or above is rare, and the nominal 2A IC may not be used at all. The MOS tube is external because of the IC process cost greater than 1A, and the external MOS tube has complicated wiring and reduced reliability. Parallel use is an effective design approach.
The DD312 parallel reference design directly drives three 6W LEDs. Enabling PWM control signals requires proper isolation to avoid mutual interference and drive capability issues. The EN enable voltage must meet the specifications and do not damage the EN pin too high. General IC withstand voltage refers to the load and power supply, please do not specify the excitation voltage, please do not exceed the 5V design.
Like this detection, the LED constant current driver IC at one end of the LED can also be driven in parallel. In fact, the IC works alone and finally in parallel. The DC-DC mode works at a higher frequency. It should be noted that the PCB layout avoids crossover design. The respective filtering and bypass capacitors should be close to the IC, and the load current will eventually be met.
Of course, it can be 2 or 3 or more parallel design, but you should remind me to try it!
Magnetic Usb Cable
Magnetic USB Cable refers to the magnet male and female to suction mode to connect the charging effect of the charging cable. Rely on the magnet magnetic attraction, traditional cable connector is separated from the cable body, both through magnetic in automatic adsorption within a certain distance, so called magnetic suction cable magnetic suction cable, magnetic suction cable, magnetic suction charging cable, etc.so that we can realize single hand plug cable, and in the process of actual use, the magnetic suction charging cable is safer than ordinary USB Cable.
Interface widely applicable to mainstream models.Thin small size for wide, differs from the traditional life of the common data interface,a new type of magnetic suction cable charging interface on the size of the thin body, even mobile phones with a set of use, magnetic suction cable also apply to the charging 90% of cell phone sets, don't need to pick a set can be used directly, so it is suitable for use in the increasingly miniaturization of electronic equipment, Can withstand more than 50,000 times of repeated insertion and removal. Fast transmission speed, perfectly compatible with mobile phone data transmission.
It is easy to use,can be single-hand operation,regardless of positive and negative, random insertion, the error rate is zero, even if the 3-year-old children can not be inserted wrong, very suitable for driving, sleeping and other life scenarios. The appearance of magnetic charging cable has impacted the market of Usb C Cable, because magnetic charging cable is much better than ordinary data cable, bringing too much convenience to life. The feeling of user experience has also risen, and more people begin to enjoy the sense of convenience brought by magnetic charging cable to life.
Magnetic Usb Cable,5A Usb Cable,Magnetic Micro Usb Cable,Led Magnetic Charging Cable
Henan Yijiao Trading Co., Ltd , https://www.yjusbhubs.com