Explosion-proof electrical operation and inspection standards - Solutions - Huaqiang Electronic Network

Probe domestic switch needle KG-300K needle head diameter is 3.0mm normally open switch needle

SMD aluminum electrolytic capacitor

100V, 250mA, surface mount, high speed switching diode

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM

The operation and inspection standards of explosion-proof electrical equipment must comply with the operating conditions of the explosion-proof electrical indicators and operating parameters, and strictly operate and check according to the instructions on the factory manual. The use of explosion-proof electrical in the society is now more and more common, there is no explosion-proof electrical, our mechanical production and electrical work will be very unsafe, which poses a great threat to people's lives and property safety, so we It is important to pay attention to the normal operation of explosion-proof electrical equipment and strictly enforce the inspection standards for explosion-proof electrical. The importance of explosion-proof electrical equipment is unquestionable. Whether it is from the perspective of people's life and property safety, or from the perspective of our production needs, explosion-proof electrical is an essential and important component.

The more developed the electrical industry, the more important the explosion-proof electrical. First of all, the first step, the operation of explosion-proof electrical equipment should be carried out in strict accordance with the relevant regulations and instructions. First press the switch, then which switch to press, which valve to open first, which valve to open after the implementation of the regulations, can not have any traces Sloppy. Safety is no small matter, and any irregularities and mistakes in one step can cause serious loss of life and property. Secondly, the second part, explosion-proof electrical also has to check the standards on time, the inspection standards must be strict, and must be standardized. High standards and strict requirements are the protection of people's lives and property, and they are also responsible for the production machinery.

In summary, we must strictly follow the regulations and systems to complete the operation and inspection of explosion-proof electrical, do every step of the work, improve the operation and inspection standards of explosion-proof electrical, I believe that in the future, our explosion-proof electrical The industry will be more and more available.