Electric steel gauge distance meter operation method - Database & Sql Blog Articles

The electric gauge length gauge is a marking instrument designed to test the elongation of steel bars. Because it has a uniform and stable rotation speed and is more accurate than the manual gauge gauge, the operation is more convenient. The following is a brief introduction to the operation method of the instrument.

First determine the gauge length, adjust the gauge length by loosening the fixing screws on both sides of the print assembly

Fasten the screws 5 mm.

Lift the silver lever lifting handle 4 and straighten the steel bar into the V-shaped groove (the straight line of the rib steel is up).

Drop handle 4

Rotate the small wheel at the left end so that the cone is at the lowest position and adjust the height adjustment handle

8 After the cone tip is in contact with the reinforcing bar, continue to lower the 1-2 mm to ensure that the cone has enough margin for the reinforcing bar.

Lift the handle 4 to turn on the power, turn the direction switch to the left line position, turn on the power switch, the power indicator light is on. If the print assembly is in the middle position, the work indicator light is also on, and the assembly line is printed to the leftmost end and stops automatically. The indicator is off.

Drop the cone, turn the direction switch to the right position, press the right button to wait for the motor to run normally, release the button, print the assembly line to the far right, and stop automatically.

Lift the cone, loosen the fastening screw, remove the reinforcement, and print it.

Then turn the direction switch to the left line position and press the left line button. After the motor runs, release the button and the printer assembly will automatically stop at the left end to maintain the ready state for the next work.

After-sales service ● Provide users with continuous, efficient and fast service to build a quality service brand;

● Establish a sound service network to provide users with professional, standardized, diversified and productized services;
● User-centered, user satisfaction as a measure of all work;

● Provide maintenance and maintenance services for life, and be responsible for the timely supply of spare parts for life;

● Provide technical consultation and technical support services free of charge for life;

●The new product will be free of charge for the whole machine in accordance with the purchase and sale contract.

● During the warranty period, no door-to-door fees, handling fees, labor costs, etc. will be charged, and all spare parts damaged under normal use will be replaced free of charge;

● Outside the warranty period, no door-to-door fees, handling fees, labor costs, etc. are charged, and only the cost of spare parts to be replaced is charged;
If you are interested in the ZS-15 cement mortar vibrating table, I would like to know more detailed product information, directly with the manufacturer.