Product DescriptionÂ
The fibers, 250μm , are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure.
Â
.High tensile strength of stranded wires meet the requirement of self-supporting and reduce the installation cost.
·Good mechanical and temperature performance
·High strength loose tube that is hydrolysis resistant
·Special tube filling compound ensure a critical protection of fiber
·The following measures are taken to ensure the cable watertight:
   ·Loose tube filling compound
   ·100% cable core filling
   ·APL moisture barrier
Â
·GGYTC8A cable complies with Standard YD/T 1155-2011 as well as IEC 60794-1.
Optical Characteristics |
G.652 |
G.655 |
50/125μm |
62.5/125μm |
|
Attenuation    |
@850nm |
 |
 |
≤3.0dB/km |
≤3.0dB/km |
@1300nm |
 |
 |
≤1.0dB/km |
≤1.0dB/km |
|
@1310nm |
≤0.36dB/km |
≤0.36dB/km |
 |
 |
|
@1550nm |
≤0.22dB/km |
≤0.23dB/km |
 |
 |
|
Bandwidth    (Class A) |
@850 |
 |
 |
≥500MHZ·km |
≥500MHZ·km |
@1300 |
 |
 |
≥1000MHZ·km |
≥600MHZ·km |
|
Numerical Aperture |
 |
 |
 |
0.200±0.015NA |
0.275±0.015NA |
Cable Cut-off Wavelengthλcc |
 |
≤1260nm |
≤1480nm |
 |
 |
Technical ParametersÂ
Cable Type |
Fiber Count |
Cable Diameter    mm |
Cable Weight   Kg/km |
Supporting Wire Spec |
Connection Diameter  |
Tensile Strength  (N) |
Crush Resistance  (N/100m) |
Bending Radius    (mm) |
GYTC8A-2~60 |
2~60 |
9.5×18.3 |
218 |
ф1.0mm×7 |
High * width   3.0×2.5 |
4000/7500 |
500/1000 |
15D/30D |
GYTC8A-62~72 |
62~72 |
10.5×19.3 |
240 |
ф1.0mm×7 |
High * width   3.0×2.5 |
4000/7500 |
500/1000 |
15D/30D |
GYTC8A-74~96 |
62~72 |
12.5×20.3 |
280 |
ф1.0mm×7 |
High * width |
4000/7500 |
500/1000 |
15D/30D |
GYTC8A-98~120 |
62~72 |
13.5×21.3 |
320 |
ф1.0mm×7 |
High * width  3.0×2.5 |
4000/7500 |
500/1000 |
15D/30D |
GYTC8A-122~144 |
62~72 |
15.0×24.3 |
350 |
ф1.0mm×7 |
High * width  3.0×2.5 |
4000/7500 |
500/1000 |
15D/30D |
Storage/Operating Temperature : -40ºC to + 70ºC
Â
Fiber Color Code | |||||||||||||
Color | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | |
No.of fiber | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | |
Color names | Blue | Orange | Green | Brown | Grey | White | Red | Black | Yellow | Violet | Rose | Aqua |
FAQ
1.Are you the real manufacturer?
Yes.  We are the real manufacturer  with 18 years' history.
Â
2.What is your fiber brand ?
Corning, YOFC, FiberHome, etc
Â
3.Can you accept small order?
Yes, small order is available .We support new project of our customers as we know business is always from small order.
Â
4.What is your warranty period?
25 years for fiber optic cable
Â
5.Which kind of certification you have ?
ISO9001, SGS, UL, RoHs.
Â
6.What is your delivery time?Â
Usually within 2-3 working days
Â
7.What about your annual production capacity?
Outdoor/Indoor Fiber Optic Cable, our annual output is 8,000,000 KM;
FTTH/FTTX/FTTA Cable, it is 6,000,000 KM per year;
Patch Cord/Pigtails, it is 12,400,000 Pieces per year.
Â
8.What is your payment way?
 T/T, L/C, Western Union and Paypal.
Â
9.Can you supply customized products and logo?
-Yes. We supply OEM&ODM service. You can send us your drawing.
Â
Â
Â
Â
Â
Â
Product DescriptionÂ
The fibers, 250μm , are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure.
Â
.High tensile strength of stranded wires meet the requirement of self-supporting and reduce the installation cost.
·Good mechanical and temperature performance
·High strength loose tube that is hydrolysis resistant
·Special tube filling compound ensure a critical protection of fiber
·The following measures are taken to ensure the cable watertight:
   ·Loose tube filling compound
   ·100% cable core filling
   ·APL moisture barrier
Â
·GGYTC8A cable complies with Standard YD/T 1155-2011 as well as IEC 60794-1.
Optical Characteristics |
G.652 |
G.655 |
50/125μm |
62.5/125μm |
|
Attenuation    |
@850nm |
 |
 |
≤3.0dB/km |
≤3.0dB/km |
@1300nm |
 |
 |
≤1.0dB/km |
≤1.0dB/km |
|
@1310nm |
≤0.36dB/km |
≤0.36dB/km |
 |
 |
|
@1550nm |
≤0.22dB/km |
≤0.23dB/km |
 |
 |
|
Bandwidth    (Class A) |
@850 |
 |
 |
≥500MHZ·km |
≥500MHZ·km |
@1300 |
 |
 |
≥1000MHZ·km |
≥600MHZ·km |
|
Numerical Aperture |
 |
 |
 |
0.200±0.015NA |
0.275±0.015NA |
Cable Cut-off Wavelengthλcc |
 |
≤1260nm |
≤1480nm |
 |
 |
Technical ParametersÂ
Cable Type |
Fiber Count |
Cable Diameter    mm |
Cable Weight   Kg/km |
Supporting Wire Spec |
Connection Diameter  |
Tensile Strength  (N) |
Crush Resistance  (N/100m) |
Bending Radius    (mm) |
GYTC8A-2~60 |
2~60 |
9.5×18.3 |
218 |
ф1.0mm×7 |
High * width   3.0×2.5 |
4000/7500 |
500/1000 |
15D/30D |
GYTC8A-62~72 |
62~72 |
10.5×19.3 |
240 |
ф1.0mm×7 |
High * width   3.0×2.5 |
4000/7500 |
500/1000 |
15D/30D |
GYTC8A-74~96 |
62~72 |
12.5×20.3 |
280 |
ф1.0mm×7 |
High * width |
4000/7500 |
500/1000 |
15D/30D |
GYTC8A-98~120 |
62~72 |
13.5×21.3 |
320 |
ф1.0mm×7 |
High * width  3.0×2.5 |
4000/7500 |
500/1000 |
15D/30D |
GYTC8A-122~144 |
62~72 |
15.0×24.3 |
350 |
ф1.0mm×7 |
High * width  3.0×2.5 |
4000/7500 |
500/1000 |
15D/30D |
Storage/Operating Temperature : -40ºC to + 70ºC
Â
Fiber Color Code | |||||||||||||
Color | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | |
No.of fiber | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | |
Color names | Blue | Orange | Green | Brown | Grey | White | Red | Black | Yellow | Violet | Rose | Aqua |
FAQ
1.Are you the real manufacturer?
Yes.  We are the real manufacturer  with 18 years' history.
Â
2.What is your fiber brand ?
Corning, YOFC, FiberHome, etc
Â
3.Can you accept small order?
Yes, small order is available .We support new project of our customers as we know business is always from small order.
Â
4.What is your warranty period?
25 years for fiber optic cable
Â
5.Which kind of certification you have ?
ISO9001, SGS, UL, RoHs.
Â
6.What is your delivery time?Â
Usually within 2-3 working days
Â
7.What about your annual production capacity?
Outdoor/Indoor Fiber Optic Cable, our annual output is 8,000,000 KM;
FTTH/FTTX/FTTA Cable, it is 6,000,000 KM per year;
Patch Cord/Pigtails, it is 12,400,000 Pieces per year.
Â
8.What is your payment way?
 T/T, L/C, Western Union and Paypal.
Â
9.Can you supply customized products and logo?
-Yes. We supply OEM&ODM service. You can send us your drawing.
Â
Â
Â
Â
Â
Â
Air fryer is a common device in automatic control system. It is generally used for switching on and off circuits. It is an important component of automatic control and remote control circuits.
Air Fryer Relay,Low Power Air Fryer Relay For Home,Sealed Air Fryer Relay For Home,Miniatureair Fryer Relay
Ningbo Xingchuangzhi Electric Appliance Co.,Ltd. , https://www.xingchuangzhi.com